BPWHL - H-50 TIN POWDER

  • MSDS: BPWHL
  • Manufacturer: SCM METAL PRODUCTS
  • Product Name: H-50 TIN POWDER
  • National Stock Number: 3439-00N034520
Product Identification

Product ID:H-50 TIN POWDER
MSDS Date:11/01/1985
FSC:3439
NIIN:00N034520
MSDS Number: BPWHL

Responsible Party
SCM METAL PRODUCTS
1468 WEST 9TH STREET
CLEVELAND, OH 44113
US

Emergency Phone: 216-344-8800

Info Phone: 216-344-8800

Cage: 3T572

Contractor
SCM METAL PRODUCTS
CLEVELAND, OH 44113 US

Telephone: 216-344-8800

Cage: 3T572

Ingredients

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: >99%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE IRRITATION OF EYES,
NOSE, THROAT AND SKIN. CHRONIC: NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. MECHANICAL IRRITATION. CONSULT PHYSICIAN.
INGESTION: UNLIKELY. CONTACT PHYSICIAN. INHALATION: REMOVE FROM
AREA. REST. CO NTACT PHYSICIAN.

Fire Fighting

Extinguishing Media:GRAPHITE, DOLOMITE, SODIUM CHLORIDE OR DRY SAND.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . DO NOT USE WATER.
Unusual Fire/Explosion Hazard:THE U.S. BUREAU OF MINES REPORT RI-6516
LISTS TIN AS A MODERATELY EXPLOSIVE MATERIAL. THE IGNITION
TEMPERATURE IN A DUST CLOUD IS GIVEN AS 630C (1170F).

Accidental Release

Spill Release Procedures:ANY FEASIBLE MECHANICAL MEANS-BROOM, MOP,
SCOOP, AVOID GENERATING DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE INSIDE IN DRY AREA AT 0-100F.
Other Precautions:THE U.S. BUREAU OF MINES REPORT RI-6516 LISTS TIN AS
A MODERATELY EXPLOSIVE MATERIAL. THE IGNITION TEMPERATURE WHEN IN A
DUST CLOUD IS GIVEN AS 630C (1170F).

Exposure Controls

Respiratory Protection:ANY NIOSH/MSHA APPROVED RESPIRATOR PROVIDING
PROTECTION AGAINST DUST HAVING TLV OF NOT LESS THAN 0.05 MG/M3.
Ventilation:LOCAL EXHAUST TO MAINTAIN EMPLOYEE EXPOSURE BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:4120F,2271C
Vapor Pres:1 @ 1492C
Spec Gravity:5.75 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:GRAY METALLIC POWDER-ODORLESS

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS, ACIDS.
Stability Condition to Avoid:OPEN FLAMES AND HOT SURFACES, MOISTURE.
Hazardous Decomposition Products:REACTION PRODUCTS WITH STRONG ACIDS
MAY BE TOXIC.

Disposal

Waste Disposal Methods:SMALL AMOUNTS-DUMP INTO LANDFILL; LARGE
AMOUNTS-SALVAGE OR SCRAP VALUE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.